粮仓温度场数学模型研究

粮仓温度的传统测试方法存在硬件结构复杂、电气元件过多,可靠性低等缺点。本文根据测量得到的有限个典型的离散温度数据,利用最小二乘法拟合出粮仓温度在其空间坐标上的分布函数,从而可以较精确地估计粮仓内任一点的温度值,大大节约了硬件资源,方便了测量工作。     

新型土坯墙体房屋抗震性能试验研究

提出了一种新型土坯墙房屋,对新型土坯墙房屋承重墙体的受力及抗震性能进行试验研究。设计三片新型土坯墙试件,研究土坯墙体在竖向荷载和反复水平荷载作用下的破坏过程、破坏形态、滞回曲线和骨架曲线特征以及墙体水平承载力和变形能力等,同时,研究新型构造措施对土坯墙抗震性能的作用。试验表明：新型土坯墙体的破坏模式与配筋混凝土小型空心砌块相似,土坯墙体具有良好的承载力和变形能力。新型构造措施对墙体整体抗震性能作用明显,其连接构造至关重要。与计算结果比较得出,在建筑抗震概念设计原则指导下,抗震设防7度区采用新型土坯墙建造二层房屋具有可行性。     

太行山前平原土壤水分特征曲线拟合参数的确定

本文分别用BrooksandCorey ,vanGenuchten和Broadbridge White模型拟合了太行山山前平原不同层次土壤水分特征曲线 (SWC) ,并用Mualem和Burdine模型计算了土壤非饱和导水率(K)和扩散率 (D)。最能较好计算实验地点D和K的方法是用vanGenuchten模型拟和SWC(约束条件m =1- 2 /n) ,用Burdine方法计算K和D。     

A CLASS OF CUBIC PARAMETER CURVES OF B-SPLINE TYPE WITH ARBITRARY PARAMETER

A class of cubic parameter curve of B-spline type is constructed in this paper with four arbitrary parameters, the cubic Hermite curve, Ball curve, Bezier curve, Timmer curve and B-spline curve as its special cases. The condition in which the curves contact with each edge of characteristic polygon is also given. In order to satisfy the actual riquirements,the shape(i. e. location of end point,direction of convixity and flexion,etc. )of curves can be modified by adjusting the four parameters.     

Materials Hydrogen Storage V3TiNi0.56Al0.2 by Self-propagating High-temperature synthesis

With the help of the calculation of adiabatic temperature and thermodynamic analysis of the reactive system the autaurs discuss possibility about system of V 2O 5-TiO 2-Al by Self-propagating High-temperature synthesis(SHS).Hydrogen Storage V 3TiNi 0.56 Al 0.2 by SHS is studied by XRD,SEM and scanning electron microscopy.The experiment result indicates that it has same microstructure between synthesization by SHS and other ways.PCT curve indicated that alloy has certain hydrogen storage capability,saturated capacity of hydrogen storage is 0.092 L/g,which is a little lower than alloy by other ways.     

The critical N dilution curve for linseed (Linum usitatissimum L.) is different from other C3 species

The objective was to determine the critical N dilution curve of linseed, which is the minimal total N concentration in shoots necessary to produce the maximal shoot dry matter, and to explain possible differences with other C3 species. One main experiment was carried out in 1998/1999 on winter linseed with four levels of fertilizer N. Two plant densities were also studied, the recommended one (600 seeds m⁻²) and the minimum for canopy closure (150 seeds m⁻²), in order to investigate the stability with plant density of the critical N dilution curve. Shoot dry weights (W_S) and shoot N contents expressed in percentage (N_S) were measured for the determination of the critical dilution curve, along with organ N percentages and relative weights. The results of four other experiments were used to validate the critical N dilution curve. Three of these four trials were conducted on winter linseed (one in 1996/1997 and two in 1997/1998) with five levels of fertilizer N, and one on spring linseed in 1999 with six levels of fertilizer N.

The critical N dilution curve of linseed was different from those of other C3 species. The curve was steeper, indicating a greater decrease in the critical shoot N concentration (N_SC) as the critical shoot dry weight (W_SC) increased. This linseed curve determined with the data of the main experiment was relevant when compared to the data of the four other experiments. Organ weight ratios and N concentration of organs were investigated in a fertilizer N treatment resulting in N_S close to the critical N values, N_SC. In this treatment, the decrease in N_S was the result of both a decrease in the N percentage of all organs and a decrease in the leaf weight ratio. The difference between linseed and other C3 species was mainly due to an acceleration of the dilution of N when leaf emission stopped and the flower bud emission began. At this stage of development, the leaf weight ratio of linseed was less than that of wheat, resulting in lower N_S. For a given W_S, no significant differences in N_S, organ N percentages nor organ weight ratios were observed between the two plant densities. This indicates that the difference between linseed and other C3 species could not result from very high plant densities in linseed. Hence, it is concluded that the linseed N accumulation in shoot is different from other C3 species.     

基于三维激光扫描成像系统的树木干曲线的分形特征

树木干曲线具有分形的结构,文章应用分形方法对甘肃小陇山地区86棵不同树种的单木以及解析木干曲线进行研究,通过计算得到干曲线的分形维数介于2-3之间,研究结果表明同一树种树木干曲线的生长趋势是一致的。经过对单木干曲线和标准解析木干曲线分形维数的测定以及比较分析,可以发现同一树种不同径阶的树木干曲线具有统计意义上的自仿射分形特征,表明分形方法在对树木及其组成部分的形态上的描述作用极大。文章针对立木的测量,采用三维激光扫描成像系统,不仅获得了丰富的测树因子信息,更以此为基础对森林计测学研究进行了扩展,是一项非常有意义的工作。     

ESP值和黏粒含量对土壤表面封闭作用的影响

降雨导致土壤表面结皮形成封闭是自然现象，它能降低土壤入渗，增加土表径流，导致土壤侵蚀。该文系统地研究了不同性质土壤表面的封闭作用过程，分别确定封闭过程中的物理机械作用和化学作用。试验采用了具有不同土壤交换性钠百分率(ESP)值(2、5、10、20)和黏粒含量(10％、20％、40％、60％)的4种土壤进行降雨模拟试验，通过土壤表面播撒磷石膏(PG)(2000 kg/hm²)和PG与聚丙烯酰胺(PAM)(PG 2000 kg/hm²+PAM 20 kg/hm²)混合物的处理，分别抑制了土壤的化学封闭和物理封闭，论述了ESP值和黏粒含量对土壤化学封闭和物理封闭作用的影响，结果表明：在高ESP值土壤中，化学封闭作用占土壤封闭的主导作用；低ESP值土壤中，土壤的物理封闭作用增大。当黏粒含量较低时，土壤物理封闭作用较低；当黏粒含量较大时，土壤物理封闭作用显著增大。     

沙漠非饱和风沙土壤水分特征曲线预测的分形模型

应用VanGenuchten提出的土壤水分特征曲线公式,推导出了沙漠风沙非饱和土壤水分特征曲线的分形模型。通过对古尔班通古特沙漠地9种不同土壤样本利用中子水分仪和负压计实测的水分特征曲线资料反求得到相应的分形维数,分析了分形维数与土壤质地之间的关系,结果表明随着土壤质地从流动风沙土、半固定风沙土到固定风沙土的变化,其分形维数呈逐渐增大。此外,基于土壤颗粒的重量与粒径分布求出了古尔班通古特沙漠地风沙土壤粒径的分形维数。通过对土壤水分特征曲线的分形维数与土壤粒径的分形维数的对比,得知它们之间存在着良好的线性关系。根据此关系,利用易测得的土壤粒径分形维数结合所推导的分形模型,对土壤水分特征曲线进行了预测,模型的预测结果很好地吻合了实测的土壤水分特征曲线。这一结果对于实际工作中根据风沙土壤颗粒大小分布的分形维数来预测沙漠风沙土壤水分特征曲线具有一定的指导意义。     

物料干燥曲线快速测定仪的研究

以８０９８单片机为核心组成的物料干燥曲线测定仪，在设定温度条件下，能连续自动称量显示出物料变化过程中的质量，进而对应算出相应含水率，并作出干燥曲线图，为烘干设备设计提供参考依据。该测定仪也可用作物料收购、烘干及贮藏过程中含水率快速检测，保证物料质量。